Engineered in Germany
At the very first beginning of a product, there is always engineering. In case of the 3 SERIES subwoofers, we took an extra amount of time for creating a product which is combining very good tonal attributes with high power handling capability and absolute performance. We take this extra effort in order to be able to provide a product that puts a smile on your face.
Performance machines dont need any make-up
If youre searching for nice decorating parts, youre on the wrong track. The plain, straight forward design shows what is inside those subwoofers true performance machines. Spacious ventilations within the basket and the pole plate guarantee an optimum cooling of the voice coil for maximum power load stability even for hours.
The advantage is in the details
The extra strengthened paper membrane ensures an optimum weight/stability ratio. A valuable rubber surrounding ensures long-term durability over years.
Special dust cap design:
- The special geometry improves its stiffness while keeping the weight low and supports the membrane significantly at the point of force transmission from the voice coil
- Extra large gluing surface for maximum stability
No Coincidence. Improving, strenghtening, selecting
All gluing of surrounding, membrane, spider and voice coil are well over engineered, compared to the standards. The elastic glue around the edges of the tinsel leads is added with great attention and care. There are only special T-yokes used, which have very low tolerances and a high surface quality. This is how a maximum of safety and durability can be granted, even if the subwoofer is pumping at its awesome Xmax of +/- 25 mm!
We keep our efforts high for lowering your limitations
Due to the black nomex-spider and a wide, flexible rubber surrounding, this woofer is capable of very high linear excursions without much mechanical loss. In addition, it has a 2x2 Ohms dual voice coil, which is offering a variation of connection possibilities to you, for best fit to almost every amplifier. Moreover, due to the extraordinary high winding, harmonic distortions are kept to a minimum even at high cone travel. Power handling of 350W RMS / 700W Music is a serious measurement without any marketing tricks. The 700W Music is the more relevant data, because this value reflects much more the load of a common music signal, whereas the sine- or noise signal used for rms-measuring is posing a strain which won´t ever occur during normal use. We recommend to use amplifiers starting from 150W (budget) up to 1.500W (fun!).